Novawall^®  ·  The Standard for Fabric Wall and Ceiling Systems

Novawall^® Details

The information in this section is intended to provide the architect, designer and end user with architectural details that can be easily be included in drawings or sketches. These details are organized by systems, i.e., square, bevel, radius and reveal. In general, NOVAWALL does not recommend mixing system types within the same elevation, e.g., using bevel edges with reveal Midseams. If you desire to do this, please consult NOVAWALL Systems, Inc. or your local distributor for assistance before specifying these types of details.

Using the Typical NOVAWALL Details, you are free to specify:

• Panel Thickness
• Fabric (See Fabric Selection tab for additional advice on fabric selection)
• Core Material
• Panel Width and Height
• Panels that Incorporate Curves as viewed in Elevation or Plan
• Non-Right Angles in Elevation or Plan (Right angles are not mandatory)
• Dramatic Grid Configurations

Architectural Details in this section are drawn in AutoCAD^® format. The following NOVAWALL systems are available:

• ½" Square
• ½" Weltless
• 1" Square
• 1" Weltless
• 1" Radius
• 1" Bevel
• 1" Square w/ ⅛" Reveal
• 1" Square w/ ¼" Reveal
• 1" Square w/ ½" Reveal
• 1" Concealed
• Multi-Inch System

Novawall^® Systems, Inc. is dedicated to utilizing U.S. manufacturers and U.S. workers whenever possible. Novawall^® extrusions, GreenFill^® cores, and Novaspan fabrics are manufactured in the U.S.A.